Safety: Turn off power to the receptacle before beginning. If you are not comfortable working around a receptacle, use a qualified installer.
What’s included
- Outlet mount
- Drywall anchor
- Mounting screw
- Installation instructions
What you’ll need
- Screwdriver
- Level
- Optional drill and included drywall anchor
Installation
- Turn off power. Remove the wall plate and loosen the upper receptacle screw.
- Place the mount tab between the receptacle and wall. Center the mount and verify alignment with the wall plate temporarily installed.
- For added support, mark the upper slot, remove the mount, and install the included anchor. A compatible Command™ Strip may be used instead of drilling.
- Reinstall the mount, add the upper support screw if used, tighten the upper receptacle screw, and reinstall the wall plate.
- Feed the HomePod mini cable through the upper opening. Wrap excess cable against the inner walls without kinking it, then route USB-C through the lower opening.
- Press HomePod mini firmly into the centered position, connect its power adapter, restore power, and make final cable adjustments.
Final check
- Do not continue while the receptacle is energized.
- Do not kink or sharply bend the power cable.
Need help?
SPEKURA supports this product directly. Contact SPEKURA on Etsy and include the product name, your order number when applicable, and a photo of the installation area when useful.