SPEKURA

Product documentation · SH-HPM-SW

HomePod Mini Wall Mount

Compatibility, preparation, and installation steps for your SPEKURA mount.

Download printable instructions (PDF)Original instruction-card artwork with full-scale mounting template.
Print the instruction sheet at 100% scale.When printing, choose “Actual Size” or set Scale to 100%. Do not use “Fit to Page” or “Scale to Fit.” Printing at another size will make the template inaccurate.

What’s included

  • Wall mount
  • Mounting screws
  • Drywall anchors
  • Mounting template and instructions

What you’ll need

  • Level
  • Tape
  • Pushpin or center punch
  • Drill with 3/16-inch bit

Installation

  1. Position the supplied template, level it, and tape it in place.
  2. Mark the crosshairs with a pushpin or center punch, then drill with a 3/16-inch bit.
  3. Insert the anchors flush with the wall. Install the screws with their heads slightly raised.
  4. Test the mount on the screws and adjust screw depth until it sits flat with slight resistance.
  5. Press HomePod mini into the mount while aligning the cable with the rear channel.
  6. Route the cable fully into the channel, then hang the complete assembly on the screws.

Final check

  • Confirm the mount sits flush and securely before releasing the speaker.

Need help?

SPEKURA supports this product directly. Contact SPEKURA on Etsy and include the product name, your order number when applicable, and a photo of the installation area when useful.

Looking for product details?

Return to product