Sonos Roam Cable Wall Mount Support

Sonos Roam Cable Wall Mount

Compatibility, preparation, and installation steps for your SPEKURA mount.

Download printable instructions (PDF)Original instruction-card artwork with full-scale mounting template.

Print the instruction sheet at 100% scale.When printing, choose “Actual Size” or set Scale to 100%. Do not use “Fit to Page” or “Scale to Fit.” Printing at another size will make the template inaccurate.

What’s included

Sonos Roam wall mount
Mounting screws
Drywall anchors
Installation instructions

What you’ll need

Level
Pushpin or center punch
Drill with 3/16-inch bit
Screwdriver

Installation

Position and level the template, then mark the hole centers.
Drill with a 3/16-inch bit and insert the anchors flush with the wall.
Align the mount with the anchors and secure it firmly using the included screws.
Route the official Sonos right-angle USB-C cable through the rear channel.
Connect the cable to Sonos Roam before placing the speaker onto the mount.

Final check

This version is for direct USB-C charging and does not hold the wireless charging base.

Need help?

SPEKURA supports this product directly. Contact SPEKURA on Etsy and include the product name, your order number when applicable, and a photo of the installation area when useful.