SPEKURA

Product documentation · SH-SR-WM-CH

Sonos Roam Charging Wall Mount

Compatibility, preparation, and installation steps for your SPEKURA mount.

Download printable instructions (PDF)Original instruction-card artwork with full-scale mounting template.
Print the instruction sheet at 100% scale.When printing, choose “Actual Size” or set Scale to 100%. Do not use “Fit to Page” or “Scale to Fit.” Printing at another size will make the template inaccurate.

What’s included

  • Sonos Roam charging wall mount
  • Mounting screws
  • Drywall anchors
  • Installation instructions

What you’ll need

  • Level
  • Pushpin or center punch
  • Drill with 3/16-inch bit
  • Screwdriver

Installation

  1. Position and level the template, then mark the hole centers.
  2. Drill with a 3/16-inch bit and insert the anchors flush with the wall.
  3. Align the mount with the anchors and secure it firmly using the included screws.
  4. Insert the official Sonos Roam Wireless Charger into the mount from the front until it is fully seated.
  5. Route the charger's power cable through the rear channel, then place Sonos Roam onto the charger.

Final check

  • Sonos Roam and the official Sonos Roam Wireless Charger are not included.
  • Confirm the mount is secure before use.

Need help?

SPEKURA supports this product directly. Contact SPEKURA on Etsy and include the product name, your order number when applicable, and a photo of the installation area when useful.

Looking for product details?

Return to product